The machine below is an IBM PC AT (Model 5170) with a 6Mhz 80286, 2Mb of memory (640K of conventional memory and 1408K of extended memory), a Color Display, a 1.2Mb and a 1.44Mb diskette drive, a 10Mb hard disk, a serial mouse on COM1, and a DEC VT100 on COM2 for BASIC-DOS’s own debugger. It boots the BASIC-DOS Extended Memory VT100 diskette, which runs the same three consoles as the Extended Memory (2Mb) demo, each on its own page of video memory, and loads DEBUG.COM as a driver on COM2. Use SHIFT-TAB to switch between them. Type PAINT in any console to draw with the mouse (click the screen to capture the mouse, and press Esc twice to exit); while PAINT’s graphics mode is on the screen, the other consoles wait.
See Protected-Mode Initialization for more details.
The diskette’s CONFIG.SYS defines three full-screen 80-column consoles, each running its own copy of COMMAND.COM: HELLO.BAT in the first, FIBO.BAT in the second, and PRIMES.BAS in the third. Each session’s memory is in its own LDT (local descriptor table), so a session’s programs can’t name another session’s memory. Only the page of the console with keyboard focus is displayed, but every console keeps running.
The boot sector first displays System starting...; press any key (or wait 2 seconds) to boot from the diskette, or press Esc to boot from the hard disk instead. Note that bypassing the diskette and booting from the hard disk will give you only one full-screen console.
Additional demo configurations: COMPAQ DeskPro 386 (using the 80386’s features).
REM Multiple Video Pages (0, 1, and 2) with extended memory, and DEBUG.COM on COM2
DEVICE=EXT\DEBUG.COM COM2:9600,N,8,1,VT100
SHELL=C:COMMAND.COM PATH$="C:\;C:\EXT;C:\DEMOS;C:\TOOLS\BIN" : HELLO
SHELL=C:COMMAND.COM PATH$="C:\;C:\EXT;C:\DEMOS;C:\TOOLS\BIN" : FIBO.BAT
SHELL=C:COMMAND.COM PATH$="C:\;C:\EXT;C:\DEMOS;C:\TOOLS\BIN" : PRIMES.BAS
Copyright (c) 2020-2026 Jeff Parsons Released under MIT License